Home
Tampoprint Pad/Tampons
Our Pads/Tampons
FAQ's
Contact us
History of Pad Printing
We measure hardness of pads in the scale of Durometer shore & scale. Harder the pad more the shore and value.Generally we supply pads in shore 2-6 values.Semi hard pad of shore 3-4 works for most applications.
The delivery times of special pads only on request. Please Contact: - info@printingpads.com For Normal pads normally we need just a week to delivery small quantities.
For 100% transfer the following things will affect quality.
Depth of cliché. (ideally 18-25 microns*
Quality of ink (special inks are needed)
Surface of pad
Hardness of pad
“Roll Angle” of Pad-(generally between 15˚to 60˚)
Tip or Vertex of Pad (Never sharp)
Pressure of pad on machine (adjustable).
Mixture of ink with solvent.
Advance Problems
In case of use of inks which are two components the inks start reacting chemically in a few hours then the printing gets affected
Home || Tampoprint Pads/Tampons || Our Pads/Tampons || FAQ's || Contact us || About Us || Pad Selection
© Copyright www.printingpads.com. 2009-2010 All rights reserved.